Fujitsu MBC2073RC Computer Drive User Manual


 
4.1 Control/Sense Commands
(1) EVPD (Enable Vital Product Data)
a) If the specification in this bits is zero, the HDD transfers the standard
INQUIRY data or the command supported data, mentioned later, to the
INIT.
b) If the specification in this bits is one, product information called VPD
(vital product data) is transferred to the INIT.
(2) CmdDt (Command Supported Data)
a) If the specification in this bits is zero, the HDD transfers the standard
INQUIRY data, mentioned later, to the INIT.
b) If the specification in this bits is one, the HDD transfers the command
supported data, mentioned later, to the INIT.
(3) Page code / Operation code
a) When the "EVPD" bits is one, this field specifies that the HDD transfers
the kind of the VPD information.
b) If the "EVPD" bit is zero and the "CmdDt" bits is one, this field specifies
the operation code (CDB byte 0) of commands generated command
supported data.
(4) Transfer Byte Length
Byte 4 of the CDB, the "Transfer Byte Length" field, shows the number of
bytes of standard INQUIRY data or VPD information that the application
client can receive by this command.
The HDD transfers data with the byte length specified in the "Transfer Byte
Length" field, or the byte length in the standard INQUIRY data or VPD
information which it is holding, whichever has the smallest number of bytes,
to the application client. When zero is specified in the "Transfer Byte
Length" field, this command is normally terminated without anything being
transferred.
(5) Standard INQUIRY data
Table 4.1 shows the format and contents of the standard INQUIRY data
transferred to the INIT by this command if "0" is specified in the "EVPD" and
the "CmdDt" bit.
C141-C013 137