Filter
Top Products
Index
C141-E042-01EN IN-3
Error correction by retry 1-3
Error posting 5-67
Error rate 1-9
Error register 5-8
EXECUTE DEVICE DIAGNOSTIC 5-42
Execution example of READ MULTIPLE
command 5-20
Execution timing of self-calibration 4-8
External magnetic field 3-6
F
Factory default setting 3-10
Failure prediction capability flag 5-58
Feature register function 5-54
Feature register value 5-38, 5-54
Features 1-2
Features register 5-9
Filter, air 4-3
Filter, breather 4-3
Filter, circulation 2-4, 4-3
Flag, failure prediction capability 5-58
Flag, status 5-58
Fluctuation, current 1-6
Format, servo frame 4-18
Format of data, device attribute value 5-56
Format of data, insurance failure threshold
value 5-57
Format of device attribute value data 5-56
Format of insurance failure threshold value
data 5-57
Frame 3-4
Frequency characteristics of programmable
filter 4-12
Full hit 6-20
Functions and performance 1-2
G
Gray code 4-19
Guard band, inner 4-18
Guard band, outer 4-18
H
HA 2-5
Head 2-2, 4-2
Head carriage 4-3
Head structure 4-3
High-speed transfer rate 1-2
Hit, full 6-20
Hit, no 6-16
Hit, partially 6-21
Hit, sequential 6-19
Hit all 6-20
Host command 5-13
I
ID, attribute 5-57
IDENTIFY DEVICE 5-31
IDENTIFY DEVICE DMA 5-37
IDLE 5-47
IDLE IMMEDIATE 5-49
Idle mode 6-10
INITIALIZE DEVICE PARAMETERS
5-30
Inner guard band 4-18
Input voltage 1-5
Installation condition 3-1
Insurance failure threshold 5-58
Interface 1-2, 5-1
Interface, ATA 2-4
Interface, logical 5-6
Interface, physical 5-2
Interface signal 5-2
Invalidating caching data 6-15
I/O register 5-6
J
Jumper location 3-9
Jumper setting 3-9
L
Large capacity 1-2
LBA mode 6-9
Limitation of side-mounting 3-4
Location, connector 3-7
Location, jumper 3-9
Logical address 6-8
Logical interface 5-6
M
Magnetic field, external 3-6
Management, defect 6-11
Mark, servo 4-19
Master 1-3
Master drive setting 3-10
Master password 5-66
Mean time between failures 1-8
Mean time to repair 1-8
Media, disk 2-3
Media defect 1-9
Microprocessor unit 4-14