Filter
Top Products
12
Power switch
• When pressed, power lamp ➀ lights red, and the power
can be turned on or off by the remote controller. When
this switch is pressed again, the power is cut and
power lamp ➀ goes off.
Power input terminal
• Firmly insert the accessory power cord as far as it will
go into the power input terminal.
• Firmly push the power cord plug as far as it will go
into the power socket. (100–240 VAC)
Video input terminal (VIDEO INPUT)
• Connects to the video output terminal of a video deck
or video disc player.
S video input terminal (S-VIDEO INPUT)
• Connects to the S video output terminal of a video
deck or video disc player.
Component video input terminal (COMPONENT
VIDEO INPUT)
• Connects to the component video output terminal of
DVD and similar devices.
RGB input terminal (RGB INPUT)
• Connects to the computer monitor's (analog RGB)
output terminal.
Cables connecting the personal computer vary ac-
cording to the type of machine, so consult your prod-
uct dealer.
RS-232C input terminal (RS-232C)
• Connects to the computer RS-232C output terminal.
Audio input terminals (AUDIO INPUT)
• Connects to the audio output terminal of a video deck
or similar device.
Sync switch (SYNC SW TTL/ANALOG (75 Ω)
• For switching the RGB terminals' 13-pin horizontal
sync and 14-pin vertical sync to terminate with 75 Ω.
When an analog synchronous signal is input at the
RGB terminal, be sure that this switch is set to ANA-
LOG (75 Ω). For connection to a personal computer,
be sure it is set to TTL.
NAMES OF PARTS AND THEIR FUNCTIONS
Rear view