Filter
Top Products
6 |
2. Connecting ScanSnap
This chapter describes how to connect ScanSnap to your
PC.
2.1. Installing the Supplied Software
Before connecting the scanner to your computer, please
install the following software on your PC.
①. Adobe Acrobat (Application)
②. ABBYY FineReader (Application)
③. ScanSnap Manager (Driver)
④. ScanSnap Organizer (Application)
⑤. CardMinder (Application)
Each software is supported by the following OS:
Windows 98
(Windows 98
2nd Edition)
Windows
Me
Windows
2000
Windows XP
(Service Pack 1
or later)
－ －
*1
*1: Compatible with Service Pack 2
• Be sure to install “ScanSnap Manager”
before connecting the scanner to your
PC.
If the scanner is connected before installing
ScanSnap Manager, the “Found New Hardware
Wizard” appears (This screen may differ
depending on the used OS). In this case, click
the [Cancel] button to close the wizard.
• It is not possible to simultaneously connect both
ScanSnap fi-5110EOX and fi-4110EOX series
scanners (or two or more S500 scanners) to
one computer.
• If any driver of the ScanSnap fi-4110EOX or
ScanSnap fi-5110EOX series has already been
installed on your computer, uninstall it before
starting the installation.
• When using Windows 2000 or Windows XP, log
on as a user with administrator privileges.
• ScanSnap S500 system requirements are:
CPU
: Intel
®
Pentium
®
III 600MHz or higher
(recommended: Intel
®
Pentium
®
4
1.8GHz or higher)*
Memory:
128MB or more
(recommended: 256MB or more)*
* If the CPU and the memory do not meet the
recommended requirements or the USB
version is 1.1, the scanning speed will slow
down.
HINT
ScanSnap Manager includes the driver software for
ScanSnap fi-4110EOX2 and ScanSnap
fi-5110EOX. If you already have any of these:
ScanSnap S500 (this product), ScanSnap
fi-4110EOX2, ScanSnap fi-5110EOX, or ScanSnap
fi-5110EOX2, you can connect any one to your PC
and use it.
2.1.1. Installing Adobe Acrobat
Please prepare the Adobe Acrobat CD-ROM.
Adobe Acrobat is not supported by Windows 98 and
Windows Me.
1. Insert the “Adobe Acrobat CD-ROM” into the
CD-ROM drive.
The “Adobe Acrobat” window appears.
HINT
This window is not displayed automatically
when the "Auto play" setting of your computer is
deactivated. In this case, please run
“AutoPlay.exe” of this CD-ROM directly using
the “Explore” or “My computer”.
2. Select the language and click [OK] button.
3. Select “Install Adobe Acrobat”.
4. Follow the instructions to install the software.
HINT
Select “How to install” on the “Adobe Acrobat”
window to learn more about the Adobe Acrobat
installation.
Refer to “Adobe Acrobat Help” about how to
use Adobe Acrobat.