Filter
Top Products
Installation Procedure 29
2
3. Fix the four rack mounting brackets to the XG2000.
Each of the four rack mounting brackets (two of front side, two of back side) has two holes
that should line up with matching holes on the sides of the XG2000, as shown in the diagram.
Attach each rack mounting bracket using the countersunk bracket screws provided.
4. Slide the XG2000 into the rack and fasten it in place.
Two rack mounting bracket of front side is fixed to the rack post with each of two rack screw
(small). and two rack mounting bracket B of reae side is fixed to the rails (rail R and rail L)
with each of three rack screws (small).
Securely tighten all the screws with a screwdriver.
Rack Screws (Small)
Rack Screws (Small)
Rack Screws (Small)
Rack Screws (Small)
Rack Mounting Bracket B
Rack Mounting Bracket
Rack Screws (Small)
Rack Screws (Large)