Filter
Top Products
For Safe Use of the XG2000 3
This symbol indicates the possibility of serious or fatal injury if the XG2000 is
not used properly.
For your safety and that of others, please follow these guidelines.
Category Warning
Danger of
electric shock
or fire
Never attempt to disassemble, dismantle, upgrade, or recycle the XG2000 by yourself.
Do not place objects on the XG2000, as there is a risk of electric shock, fire, and/or damage.
Do not install the XG2000 where it will be exposed to direct sunlight, close to a heating device, or in an
environment with much dust and high humidity, as there is a risk of electric shock and fire.
For XG2000 models with cooling vents, do not block off the vents as these prevent the internal parts of the
XG2000 from reaching high temperature, and there is a risk of fire.
Do not wrap the running XG2000 with a cloth. Doing so keeps the heat in, and may cause a fire.
Avoid getting any liquids (such as coffee) or pieces of metal (such as paper clips) into the XG2000, as there
is a risk of electric shock and fire. To avoid foreign objects getting into the XG2000, never place objects on it.
Do not put your fingers into the LAN jack, as there is a risk of electric shock.
Do not use the XG2000 with any voltage other than that specified on the device, as there is a risk of electric
shock and fire.
Should the XG2000 start giving off heat, smoke, and/or a strange smell, immediately disconnect the power
plug from the power outlet. To make this easy, the XG2000 should be located close to the power outlet
(wall socket or power strip), and the power outlet must be readily accessible.
After the power is disconnected, contact the vendor's service department immediately. Continued use of
the XG2000 may cause an electric shock and fire.
Note that in this case, the state of data in transmission is not guaranteed.(P.35)
If the power plug or power socket is dirty, clean it with a dry cloth. Continued use may cause a fire.(P.34)
Do not touch the power plug with wet hands, as there is a risk of electric shock.(P.34)
Insert the power plug completely into the power socket.
A partially inserted power plug may cause an electric shock, give off smoke, and/or catch fire.(P.35)
When you remove a power plug from its outlet, be sure to pull the only power plug itself. Pulling on the
power cord itself may expose the cores or break the cord, and cause electric shock or fire.(P.35)
If the XG2000 is to be left unused for any significant period, remove the power plug from the outlet for
safety reasons. Failure to do so may cause a fire or damage.(P.35)
Do not damage or remodel the power cords, as this may cause electric shock or fire.
Do not place any object on, wrap any object with, pull and/or kick the power cords, as there is a risk of elec-
tric shock and fire.(P.34)
Never overload a power outlet with multiple devices.
If too many devices are connected, the power socket may overheat and cause a fire.
When you remove a power plug from an outlet, be sure to pull the power plug itself.
A power plug damaged by incorrect removal may cause an electric shock and fire.
Do not use the XG2000 with a damaged power cord, a damaged power plug, and/or a loose socket.
Continued use under these conditions may cause an electric shock and fire.(P.34)
Do not bundle the power cords. Doing so increases the heat density, and may cause a fire.
Unplug the XG2000 during thunder-storms. Continued use under these conditions risks lightning damage
to the XG2000, and may cause a fire.(P.35)
Danger of
breakage and
injury
Do not place the XG2000 on its side or stack up multiple XG2000s.
Ignoring this may damage the XG2000 or injure the operator.
Do not install the XG2000 in an unstable place (such as on a slanted surface or a place subjected to vibra-
tions).
Doing so may cause injury or device damage.
Do not place any objects or perform any work on the XG2000.
Ignoring this may damage the XG2000 or injure the operator.
Never leave the plastic bags the XG2000 was packed in around where children can find them, as they may
suck them into their mouths or place them over their heads in fun, with a severe risk of choking and asphyxia.
Do not dispose the XG2000 with other wastes. If burnt, the XG2000 can explode.
WARNING