Filter
Top Products
13
IEEE139
4
Cable
Knob
HDD
HD
2.6 Replacing Backup HDD
On some vessels several backup HDDs (Type: VR-3011, Code No.:004-385-000, Option) are
carried onboard, replacing one when it is necessary to transport it from the vessel for playback
and extract.
A backup HDD may only be replaced in the follow situations:
1) When the equipment can be powered off; for example, maintenance while in port, etc.
2) An incident has occurred and the Save button on the RAP (VR-3016) was operated to stop
recording.
An HDD may not be re-used for recording after the Save button has been operated four times.
Contact a FURUNO dealer for further details.
A backup HDD records navigation data for more than past 12 hours (13 hours max). For longer
recording, use Live Player Backup.
DRU
VR-5020
DCU
VR-3010
PC for
Playback / Extract
IEEE1394
(4Pin – 6Pin)
HDD
VR-3011
Change
AC Adapter
HDD
VR-3011
RAP
VR-3016
Replacing backup HDD
1. Open the DCU with its key. Turn off the
DCU.
2. Pull the knob on the HDD holder to open
the holder.
3. Disconnect IEEE1394 cable from the HDD.
Remove the HDD.
4. Set new HDD to holder.
5. Connect IEEE1394 cable.
6. Push knob on the HDD holder to close the
holder. Turn on the DCU.
7. Confirm that HDD is operating (DCU power
is ON, Save LED is OFF) with no error.
8. Close the DCU and lock it with its key.
9. Refer to the operator’s manual of the Live
Player
Pro for how to playback/extract recorded
data from the Backup HDD.