Filter
Top Products
Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06)
36
www GarrettCom com
..
screw down tightly with the three 5/16 stand-off (male) on the top of the
Granddaughter board The 5/16 stand off has been used to place the daughter
board on the top of the granddaughter board and latch it securely.
Step 3. The figure here illustrates the basic layout of an individual PM card. Each
6KPM card fits into the space provided on the main board.
Fig. 3.6.2c Daughter Board, top view of
4 copper 10/100 ports
Fig 3.6.2d Daughter Board shown upside down with two male latch connectors
Step 4. Hold the daughter board with both hands at the end and align the two cream
color latching
connectors (male)
placed at the bottom of
the daughter board with
the other female
connector placed on the
Granddaughter and
main board. As shown
below in Fig. 3.6.2e
Fig. 3.6.2e Magnum 6KPM
daughter board aligned with the bottom female connector for the installation
Uplink
Switch