Gateway ALR 7200 Personal Computer User Manual


 
10 Gateway ALR 7200 User’s Guide
Basic Features
Intel Pentium
®
II processor (speed depends on the model)
SMP design supporting up to two processor modules; Intel MP
Specification V1.1 and 1.4 compliant
32-bit PCI and 16-bit ISA bus master; 64-bit processor and
memory data path; extended PCI-to-PCI bridge support
32-MB Error Checking and Correcting (ECC) synchronous
dynamic random access memory (SDRAM), expandable to 1-GB
using ECC 60-ns 72-bit SDRAM DIMMs
Integrated 2-MB DRAM PCI Graphics (Cirrus Logic GD54M30)
Seven expansion slots: five PCI, one shared PCI/RAID port, and
one shared PCI/ISA.
Integrated dual channel PCI Ultra2 SCSI (Adaptec 7890) with two
68-pin connectors, dual-channel Ultra-DMA PCI IDE interface,
and floppy controller supporting 1.44-MB and 2.88-MB formats.
RAID port ready: the shared PCI/RAID port slot supports the
addition of a RAID port card to provide RAID capability.
Low voltage differential (LVD) support for SCSI devices. LVD
SCSI allows faster disk access and greater data integrity
Power supply unit that provides 300-W of DC power to internal
system components.
Phoenix upgradable Flash BIOS, Year 2000 Ready
Optional rack mount conversion kit allows you to convert the
minitower chassis to a rack mount unit. The conversion kit is sold
separately.
The system is equipped with InforManager™ (IFM), a special
feature consisting of both hardware and software designed to
monitor and report the operating status of the system and its
devices: CPUs, power supplies, RAM, ambient temperatures,
voltages, and fan operation. For further information about the
InforManager™, refer to the InforManager™ User’s Guide.
3435.boo Page 10 Thursday, August 6, 1998 7:12 AM