Filter
Top Products
Chapter 2: Unit Installation
appliance. Double crimp the ground ring terminal to the wire. Next, slide
the ground ring terminal over the ground lug. Then fasten the ground ring
terminal to the ground lug using the ground nut. The ground nut must be
turned clockwise to tighten it onto the ground lug. The opposite end of the
wire that is connected to the ground ring terminal should be securily
fastened to an unpainted metalic section of a properly earth grounded
equipment rack. A connector for the opposite end of the wire is not
provided with the Gateway Series appliance.
Note: Taking into consideration the requirements of all equipment
connected to or sharing the rack, the equipment rack should be
properly earth grounded. Refer to the manufacturer of the rack for
instructions on how to properly earth ground the rack.
Important
Use only a grounded electrical outlet when connecting the
Gateway Series appliance to a power source. If you do not
know whether the outlet is grounded, consult with a qualified
electrician.
Digium, Inc. Page 25