Gateway G800 Network Router User Manual


 
Chapter 3: Configuration
Global SIP Settings
This section provides the ability to add and modify global SIP settings.
These settings are for experienced administrators only. Please take care
when modifying any of these settings. The default values should be
sufficient for most applications. Included are the following sections.
Networking - General, NAT, RTP, RTCP, and DTMF settings. The
following settings are available.
UDP Bind Port
Enable TCP
TCP Bind Port
TCP Authentication Timeout
TCP Authentication Limit
Enable Hostname Lookup
Local Network
Local Network List
Subscribe Network Change Event
Match External Address Locally
Dynamic Exclude Static
Externally Mapped TCP Port
External Hostname
Hostname Refresh Interval
Start of RTP Port Range
End of RTP Port Range
Parsing and Compatibility - General, SIP methods, Caller ID, timer
configuration, and outbound registrations. The following settings are
available.
Strict RFC Interpretation
Digium, Inc. Page 53