Gateway G800 Network Router User Manual


 
Chapter 3: Configuration
SIP Endpoints
This section provides the ability to add and modify SIP endpoints, and
configure call, media, and fax settings. A SIP endpoint will typically be a
SIP PBX or SIP provider connected to the Gateway Series appliance.
Included are the following sections.
Main - Primary options for SIP endpoint configuration. The following
settings are available.
Enable Advanced Options
Name
Username
Password
Registration
Destination Number
Hostname or IP address
Use UDP
Use TCP
NAT Traversal
Authentication User
From User
From Domain
Remote Secret
Port
Qualify
Qualify Frequency
Call Settings (Advanced) - DTMF, Caller ID, signaling, authentica-
tion, and advanced timer settings. The following settings are available.
Digium, Inc. Page 50