Filter
Top Products
13
Replacing the hard drive in the hard drive kit
www.gateway.com
Replacing the hard drive in the
hard drive kit
Tools you need to complete this task:
Screws removed during this task:
To replace the hard drive in the hard drive kit:
1 Disconnect the AC adapter and modem and network cables and prepare
the notebook by following the instructions in “Preparing the notebook”
on page 6.
2 Turn the notebook over so the bottom is facing up.
3 Remove the battery by following the instructions in “Removing the
battery” on page 7.
4 Remove the hard drive kit by following the instructions in “Replacing the
hard drive kit” on page 9.
Phillips #0 screwdriver
4 chrome 3 × 3.5 mm
(hard drive)
2 chrome 2.5 × 6 mm
(hard drive kit)