Filter
Top Products
31
Adding or replacing memory modules
www.gateway.com
Replacing memory under the keyboard
Tools you need to complete this task:
Screws removed during this task:
To replace memory modules:
1 Disconnect the AC adapter and modem and network cables and prepare
the notebook by following the instructions in “Preparing the notebook”
on page 6.
2 Turn the notebook over so the bottom is facing up.
3 Remove the battery by following the instructions in “Removing the
battery” on page 7.
4 Turn the notebook over so the top is facing up.
5 Open the LCD panel to the normal viewing position.
Important Use only memory modules designed for the
Gateway M350 for upgrading your memory.
Flat-blade driver Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
4 chrome 2.5 × 2.5 mm
(keyboard)