Filter
Top Products
32
Replacing Gateway M350 Components
www.gateway.com
6 Remove the keyboard cover by following the instructions in “Replacing
the keyboard cover” on page 19.
7 Open the keyboard compartment by following the instructions in
“Replacing the keyboard” on page 23.
8 Gently press outward on the clip at each end of the memory module until
the module tilts upward.
9 Pull the memory module out of the slot.
10 Hold the new or replacement module at a 30-degree angle and press it into
the empty memory slot. This module is keyed so it can only be inserted
in one direction. If the module does not fit, make sure that the notch in
the module lines up with the tab in the memory bay.
Important You do not need to disconnect the keyboard from the
system board.