Filter
Top Products
52
Replacing Gateway M350 Components
www.gateway.com
13 Carefully insert the small flat-blade screwdriver between the touchpad
cable and the black plastic hinge where the cable connects to the system
board. Gently lift the hinge off the cable. The cable is now free.
14 Lift the palm rest assembly completely from the notebook.
15 Place the new palm rest assembly onto the notebook, then snap the
assembly into place.
16 Replace all of the palm rest screws.
17 Make sure that the black plastic hinge on the system board touchpad
connector is in the raised position.
Important The three shorter screws fit into the battery bay.