Gateway M360 Laptop User Manual


 
CHAPTER 3: Maintaining and Upgrading Your Notebook www.gateway.com
38
Replacing the hard drive kit
Tools Required
You need a small Phillips screwdriver to
replace the hard drive kit.
If you would like more hard drive capacity, you can replace your original drive
with a higher-capacity drive.
To replace the hard drive kit:
1 Create a Drivers and Applications Recovery disc using the procedure found
in the online User Guide.
2 Print the Recovering Your System chapter from the online User Guide for use
in Step 18.
3 Back up any data you want to transfer to the new hard drive. For more
information, see “Backing up files” in the online User Guide.
4 Follow the guidelines under “Preventing static electricity discharge” on
page 32.
5 Turn off your notebook.
6 Disconnect the AC adapter, modem cable, and network cable.
7 Disconnect all peripheral devices and remove any PC cards.
8 Turn your notebook over so the bottom is facing up, then remove the
battery. For more information, see “Changing batteries” on page 27.
Hard drive kit