Filter
Top Products
Chapter 4: Web-Based Management
GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 109
IGMP Configuration
The Switch support IP multicast, you can enable IGMP protocol on web
management's switch setting advanced page, then the IGMP snooping information
displays. IP multicast addresses range are from 224.0.0.0 through 239.255.255.255.
Figure 78: IGMP Configuration interface
This page includes the following fields:
OBJECT DESCRIPTION
IGMP Protocol Enable or disable the IGMP protocol.
IGMP Fastleave Enable or disable Fast Leave on the port.
IGMP Querier Enable or disable the IGMP query function. The IGMP query information
will be displayed in IGMP status section.
NOTE: Fast Leave: The Managed Switch can be configured to immediately delete a
member port of a multicast service if a leave packet is received at that port and the
fastleave function is enabled for the parent VLAN. This allows the Managed witch to
remove a port from the multicast forwarding table without first having to send an
IGMP group-specific query to that interface.