Filter
Top Products
Chapter 4: Web-Based Management
120 GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual
Binding
Let a device that has specific IP address and MAC address use the network. We can
set specific IP address, MAC address, VLAN id and port id to bind, and device can
cross switch if all conditions match.
Use binding function; we should enable it first in following page.
In Packet Type/Binding box should select Binding.
OBJECT DESCRIPTION DEFAULT VALUE
Group ID 1 - 247 (max. 247 ACL group)
Action Permit / Deny.
• Permit : Permit packet cross switch.
• Deny: Drop packet.
Permit
VLAN Any / VID.
• Any: Any Vlan id.
• VID: 1-4094. A certain vlan id.
Any
Packet Type IPv4 / Non-IPv4 / Binding
• IPv4: Set Ipv4 packet field.
• Non-IPv4: Set non-Ipv4 packet field.
• Binding: Set binding entry.
IPv4
MAC Address **:**:**:**:**:**
* is represent a digit from 0-9 and A-F,
*** is range from 0 to FF.
00:11:22:33:44:55
IP Address ***.***.***.***
* is represent a digit from 0-9,
*** is range from 0 to 255.
0.0.0.0
Port Id Source port id, from 1-26. 1
Current List You create ACL and Binding groups.