Filter
Top Products
8
1 LED Button Press Indicator
This LED will activate momentarily upon each button press. This visual
indicator is to inform the user that a command has been sent by the IR
remote control.
2 Display and Source Selection Buttons
These buttons will be used to send display and source selections to the
GefenToolBox 4x1 Switcher for HDMI.
Routing Sources to Displays
Issuing a routing command is a simple process. There are a total of 4 buttons on
the RMT-4IR. The individual buttons represent the Inputs that are available for
the Output.
For example, to route the source connected to HDMI In 2 to the display, press
button 2 on the RMT-4IR.
IR REMOTE CONTROL UNIT DESCRIPTION
1
2