Gefen GTB-MHDMI1.3-441 Switch User Manual


 
14
RS-232 SERIAL CONTROL
Commands
Simpli ed syntax was used for command implementation for faster operation with
the device. These commands are not case-sensitive.
Command Description
A Enable Auto-Switching
N Disable Auto-Switching
S Get System Status
V Displays Firmware Version
A Command
The A command enables auto-switching. The Switcher will automatically switch
to the last source device that was powered on.
Syntax:
a
Parameters:
None
N Command
The N command disables Auto-Switching.
Syntax:
n
Parameters:
None