Filter
Top Products
RMT-SR-IR INSTALLATION
Remove battery cover from the back of the RMT-SR-IR remote.1.
Verify that dip switches 1 & 2 are in the down (OFF) position. (See page 13)2.
Insert the battery, hold the battery so that you can see the positive side 3.
facing up. The side that is not marked must be facing down.
Test the RMT-SR-IR remote by pressing ONLY one button at a time. The 4.
indicator light on the remote will ash once each time you press a button.
WARNING:
Do not press multiple buttons simultaneously and do NOT press buttons rapidly.
These actions will cause the remote to reset and steps 1-4 will have to be
repeated.
Note: The RMT-SR-IR ships with two batteries. Only one battery is required for
operation, the other battery is complimentary.
The optional IR extender allows you to
relocate your HDMI Switcher and still retain IR
control. Gefen part# EXT-RMT-IREXT
G
T
V
-
S
R
-
I
R
12