Filter
Top Products
- 23 - Hardware Installation Process
English
7) IDE1/ IDE2(IDE1/IDE2 Connector)
Please connect first harddisk to IDE1 and connect CDROM to IDE2. The red stripe of the ribbon
cable must be the same side with the Pin1.
IDE1
IDE2
1
8) IDE3 /IDE4 (RAID/ATA133,Green Connectorr)**
The rad stripe of the ribbn cable must be the same side with the Pin1.
If you wish to use IDE3 and IDE4, please use it in unity with BIOS (either RAID or ATA133).
Then, install the correct driver to have proper operation. For details, please refer to the RAID manual.
(BIOS Default Value :ATA, If you want to use
RAID function, please change “Integrated
Peripherals-RAID Controller Function “ to
“RAID”)
39
2
40
* For GA-8PE667 Pro Only ** For GA-8PE667 Ultra2 Only
1
IDE4
IDE3
2
39
40