Filter
Top Products
- 46 -GA-8PE667 Ultra2 / Pro Motherboard
English
))
))
)Onboard LAN Boot ROM
0The function is to invoke onboard LAN chip to boot up the system
Enable Enable onboard LAN boot ROM function.
Disable Disable this function. (Default value)
))
))
)Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
))
))
)Onboard Serial Port 2
Auto BIOS will automatically setup the port 2 address.
3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8. (Default Value)
3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8.
Disabled Disable onboard Serial port 2.
))
))
)UART Mode Select
0This feature allows you to determine which Infra Red(IR) function of Onboard I/O chip)
ASKIR Using as IR and set to ASKIR Mode.
IrDA Using as IR and set to IrDA Mode.
Normal Using as standard serial port. (Default Value)
S CR Using as smart card Interface .
))
))
)UR2 Duplex Mode(When UART Mode Select is set [ASKIR or IrDA or SCR])
0This feature allows you to select the IR modes.
Half IR Function Duplex Half. (Default Value)
Full IR Function Duplex Full.