Gigabyte GA-K8N-SLI Computer Hardware User Manual


 
K8 nForce4 SLI Series Motherboard - 42 -
English
NV SATA 2 class code
(Note)
0101 Set NV SATA 2 class code to 0101. (Default value)
0104 Set NV SATA 2 class code to 0104.
NV SATA 2 Primary RAID
Enabled Enable 2nd SATA primary RAID function. (Default value)
Disabled Disable this function.
NV SATA 2 Secondary RAID
Enabled Enable 2nd SATA secondary RAID function. (Default value)
Disabled Disable this function.
IDE Prefetch Mode
Enabled Enable IDE Prefetch mode. (Default value)
Disabled Disable IDE Prefetch mode.
USB Memory Type
SHADOW Set USB memory type to SHADOW. (Default value)
Base Memory(640K) Set USB memory type to base memory(640K).
AC97 Audio
Auto Enable onboard AC'97 audio function. (Default value)
Disabled Disable this function.
Onboard 1394
Enabled Enable onboard IEEE1394 function.(Default value)
Disabled Disable onboard IEEE1394 function.
Onboard LAN control (LAN1)
Enabled Enable onboard LAN chip function.(Default value)
Disabled Disable onboard LAN chip function.
OnBoard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled Enable this function.
Disabled Disable this function. (Default value)
SATA RAID-5/ATA controller (Controlled by Sil3114 chip)
This option is to enable or disable the Sil3114 controller.
Enabled Enable onboard Serial ATA Chip.(Default value)
Disabled Disable onboard Serial ATA Chip.
SATA controller Function (Controlled by Sil3114 chip)
RAID-5 Set Sil3114 Serial ATA Chip to RAID mode.(Default value)
ATA Set Sil3114 Serial ATA Chip to ATA mode.
Only for GA-K8N Ultra-SLI. Only for GA-K8N Pro-SLI.
(Note) When using driver version 1.2, please enable "NV IDE/SATA RAID function" if you wish to create
RAID data drive or install O.S. on the RAID drive.
And manually set "NV SATA1/NV SATA 2 class code" from 0101 to 0104.
If your SATA hard drive is connected to the SATA0 or SATA1 connector , please set "NV SATA1
class code" to 0104. If your SATA hard drive is connected to the SATA2 or SATA3 connector ,
please set "NV SATA2 class code" to 0104.