Filter
Top Products
BIOS Setup- 47 -
English
Current Voltage(V) Vcore / DDR25V / +3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/POWER/SYSTEM FAN Speed (RPM)
Detect CPU/Power/System fan speed status automatically.
CPU Warning Temperature
60
o
C / 140
o
F Monitor CPU temperature at 60
o
C / 140
o
F.
70
o
C / 158
o
F Monitor CPU temperature at 70
o
C / 158
o
F.
80
o
C / 176
o
F Monitor CPU temperature at 80
o
C / 176
o
F.
90
o
C / 194
o
F Monitor CPU temperature at 90
o
C / 194
o
F.
Disabled Disable this function. (Default value)
CPU FAN Fail Warning
Disabled Disable CPU fan fail warning function. (Default value)
Enabled Enable CPU fan fail warning function.
CPU Smart FAN Control
(Note)
Disabled Disable this function. (Default Value)
Enabled When this function is enabled, CPU fan will run at different speed depending
on CPU temperature. Users can adjust the fan speed with Easy Tune
based on their requirements.
CPU FAN Manual Control
CPU Smart Fan Control will become disabled when this item is enabled.
Enabled Enable the CPU fan manual control function.
Disabled Disable the CPU fan manual control function. (Default value)
CPU FAN: Low Speed
Set the parameter of the CPU fan speed.
The CPU FAN: Low Speed option configures the speed of the CPU fan when the CPU temperature
is below the temperature set in Temp Limit of Mid Speed. The parameter can be adjusted from
0~127. Higher parameter means faster CPU fan speed. (Default parameter: 8)
CPU FAN: Mid Speed
Set the parameter of the CPU fan speed.
The CPU FAN: Mid Speed option configures the speed of the CPU fan when the CPU temperature
exceeds the temperature set in Temp Limit of Mid Speed. The parameter can be adjusted from
0~127. Higher parameter means faster CPU fan speed. (Default parameter: 12)
CPU FAN: High Speed
Set the parameter of the CPU fan speed.
The CPU FAN: High Speed option configures the speed of the CPU fan when the CPU temperature
exceeds the temperature set in Temp Limit of High Speed. The parameter can be adjusted from
0~127. Higher parameter means faster CPU fan speed. (Default parameter: 80)
The CPU fan runs at full speed when both CPU Smart FAN Control and CPU FAN Manual
Control are disabled.
(Note) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
For more detailed information please check at the FAQ section on GIGABYTE's website.