Filter
Top Products
BIOS Setup- 53 -
English
2-7 MB Intelligent Tweaker(M.I.T.)
CPU Frequency(MHz)
Auto BIOS will automatically setup the CPU Frequency(MHz).
100 ~ 500 Set CPU frequency from 100MHz to 500MHz.
PCIE Clock(SB) MHz
Auto BIOS will automatically setup the PCIE Clock(SB) MHz.
100Mhz ~ 200Mhz Set PCIE Clock(SB) MHz) from 100Mhz to 200Mhz.
NB<->SB Reference clock
Auto BIOS will automatically setup the NB<->SB reference clock.
100 ~ 500 Set NB<->SB reference clock from 200.0 to 500.0.
PCIE Clock(NB) MHz
Auto BIOS will automatically setup the PCIE Clock(NB) MHz.
100Mhz ~ 200Mhz Set PCIE Clock(NB) MHz from 100Mhz to 200Mhz.
Incorrect using these features may cause your system broken. For power end-user use only.
CPU Smart FAN Control
(Note)
Disabled Disable this function.
Enabled When this function is enabled, CPU fan will run at different speed depending
on CPU temperature. Users can adjust the fan speed with Easy Tune
based on their requirements. (Default value)
CPU Smart FAN Mode
This option is available only when CPU Smart FAN Control is enabled.
Auto BIOS autodetects the type of CPU fan you installed and sets the optimal
CPU Smart FAN control mode for it. (Default Value)
Voltage Set to Voltage when you use a CPU fan with a 3-pin fan power cable.
PWM Set to PWM when you use a CPU fan with a 4-pin fan power cable.
(Note) Whether the CPU Smart FAN Control function is supported will depend on the CPU you install.
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU Frequency(MHz) [Auto]
PCIE Clock(SB) NHz [Auto]
NB<->SB Reference clock [Auto]
PCIE Clock(NB) NHz [Auto]
CPU Clock Ratio [Auto]
Robust Graphics Booster [Auto]
DDR2 OverVoltage Control [Normal]
S-Chipset/PCIE Voltage [Normal]
CPU HT-Link Voltage [Normal]
HT-Link Voltage [Normal]
N-Chipset/PCIE Voltage [Normal]
CPU Voltage Control [Normal]
Normal CPU Vcore 1.350V
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F11/12: Profile F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level