Filter
Top Products
GA-M59SLI-S5/GA-M59SLI-S4 Motherboard - 54 -
English
CPU Clock Ratio
This setup option will automatically assign by CPU detection. The option will display "Locked" and
read only or will not show up if the CPU ratio is not changeable.
Robust Graphics Booster
Select the options can enhance the VGA graphics card bandwidth to get higher performance.
Auto Set Robust Graphics Booster to Auto. (Default value)
Fast Set Robust Graphics Booster to Fast.
Turbo Set Robust Graphics Booster to Turbo.
DDR2 OverVoltage Control
Please note that by overclocking your system through the increase of the DDR2 voltage, damage
to the memory may occur.
Normal Set DDR2 voltage to Normal. (Default value)
+0.1V Set DDR2 voltage to +0.1V.
+0.2V Set DDR2 voltage to +0.2V.
+0.3V Set DDR2 voltage to +0.3V.
+0.4V Set DDR2 voltage to +0.4V.
+0.5V Set DDR2 voltage to +0.5V.
+0.6V Set DDR2 voltage to +0.6V.
+0.7V Set DDR2 voltage to +0.7V.
S-Chipset/PCIE Voltage
Set the voltage settings for Southbridge, its PCI Express bus voltage.
Normal Set Southbridge/PCIE voltage to Normal. (Default value)
+0.1V Set Southbridge/PCIE voltage to +0.1V.
+0.2V Set Southbridge/PCIE voltage to +0.2V.
+0.3V Set Southbridge/PCIE voltage to +0.3V.
CPU HT-Link Voltage
Set the voltage settings for the HT-Link between CPU and Northbridge.
Normal Set CPU HT-Link voltage to Normal. (Default value)
+0.1V Set CPU HT-Link voltage to +0.1V.
+0.2V Set CPU HT-Link voltage to +0.2V.
+0.3V Set CPU HT-Link voltage to +0.3V.
HT-Link Voltage
Set the voltage settings for the HT-Link between Southbridge and Northbridge.
Normal Set HT-Link voltage to Normal. (Default value)
+0.1V Set HT-Link voltage to +0.1V.
+0.2V Set HT-Link voltage to +0.2V.
+0.3V Set HT-Link voltage to +0.3V.