Filter
Top Products
Safety, Care and Regulatory Information
Important safety instructions
Read and follow all instructions marked on the product and in the documentation before
you operate your system. Retain all safety and operating instructions for future use.
The product should be operated only from the type of power source indicated on the
rating label.
The plug-socket combination must be accessible at all times because it serves as the
main disconnecting device.
All products hipped with a three-wire electrical grounding-type plug only fits into a
grounding-type power outlet. This is a safety feature. The equipment grounding should
be in accordance with local and national electrical codes. The equipment operates
safely when it is used in accordance with its marked electrical ratings and product
usage instructions
Do not use this product near water or a heat source.
Set up the product on a stable work surface or so as to ensure stability of the system.
Openings in the case are provided for ventilation. Do not block or cover these openings.
Make sure you provide adequate space around the system for ventilation when you set
up your work area. Never insert objects of any kind into the ventilation openings.
To avoid electrical shock, always unplug all power cables and modem cables from the
wall outlets before removing covers.
Allow the product to cool before removing covers or touching internal components.
Use only the power cord and batteries indicated in this manual. Do not dispose of
batteries in a fire. They may explode. Check with codes for possible special
disposal instructions.
Precautions for Products With Modems, Telecommunications, or Local Area Network
Options
Observe the following guidelines when working with options:
• Avoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electric shock from lightning.
• CAUTION - To reduce the risk of fire, use only No. 26 AWG or larger
telecommunication line cord.
• Do not plug a modem or telephone cable into the network interface controller (NIC)
receptacle.
• Disconnect the modem cable before opening a product enclosure, touching or
installing internal components, or touching an uninsulated modem cable or jack.
• Do not use a telephone line to report a gas leak while you are in the vicinity of the
leak.
• Do not use this product near water, for example, near a bathtub, washbowl, and