Filter
Top Products
Sub2 session have no backup sessions. Backup session can be set the main
session only.
Note: The backup session can be specified LAN type connection.
Our priority of rule
SUB2 > SUB1 >MAIN
In other words, every packets pass thought the router would be matching SUB2
rule first. If it is match, packet next hop will be change to SUB2 session gateway. If
it is not, the Router check packet information matched with SUB1 rule. If it still not
matched that will be route to main session gateway.
Note:
1. Rule could be overlap for any condition.
2. All of rule in one session must be match.
3. Check order is SUB2->SUB1->MAIN, if any session rules matched. It will
jump out the check order.
4. Main session is default session. All of packets match fail will be group under
main session.
Exception:
1. If sub session connection fail, the rule also to break down. Another session
route path is alive. Packet will pass thought this session. It seems backup the
sub session use main or sub1.
2. If main session is unlink or connection fail, sub1 and sub2 still by pass the
match packet.
3. Each session are independent with NAT address translation.
The method of setting IP address:
IP Address Description
* All IP address
192.168.1.3 Specific IP address
192.168.1.0/24 Network address(24bit netmask)
192.168.1.3−192.168.1.33
Range assigned
Separated by “−” ; no space
192.168.1.3,192.168.0.8
To allocate
Separated by comma “,” ; no space
56