Filter
Top Products
43
Bit Function Value
01
0
1 vertical
2 magnification see Table 2
3
4
5 horizontal
6 magnification see Table 1
7
<< Details >>
This command is ignored if either a vertical or horizontal
magnification is outside the definable range.
In the standard mode, the vertical direction refers to the
direction of paper feed, and the horizontal direction the
direction right to the direction of paper feed. If characters
are 90-degree right or left are specified, the relationship
of the vertical and horizontal directions is reversed.
If characters with different vertical magnifications are
contained in the same line, they are aligned to the
baseline.
Table 1 Table2
bit7 bit6 bit5 bit4 Magnification bit3 bit2 bit1 bit0 Magnification
0 0 0 0 1 (Std.) 0 0 0 0 1 (Std.)
0 0 0 1 2 (horizontal) 0 0 0 1 2 (vertical)
0 0 1 0 3 0 0 1 0 3
0 0 1 1 4 0 0 1 1 4
0 1 0 0 5 0 1 0 0 5
0 1 0 1 6 0 1 0 1 6
0 1 1 0 7 0 1 1 0 7
0 1 1 1 8 0 1 1 1 8
Specifies /
clears
download
character set
Command: ESC %n
<< Code >>
0x1B , 0x25 , n (0≤n≤255 , initial value n=0)
<< Function >>
Specifies or clears a download character set.
Only the lowest bit of n is effective. Download character
setting is specified if n=1 and cleared if n=0.