Filter
Top Products
Install the Advanced Web Interface (AWI) Module
12 313386D
Install the Advanced Web Interface (AWI) Module
Overview
The Graco Advanced Web Interface (AWI) Accessory
allows communication between multiple ProMix
2KS/3KS and a PC over an Ethernet, enabling users to
monitor the ProMix 2KS/3KS, view and change system
setup parameters, and create reports.
NOTE: Screen views in this manual are shown using
Microsoft Windows XP.
Location
The AWI module may be installed in a local ProMix net-
work (see F
IG. 25) or in a LAN network (see FIG. 26).
Install the module near the EasyKey, in a non-hazard-
ous area.
Mounting
1. See Dimensions, page 41.
2. Ensure that the wall and mounting hardware are
strong enough to support the weight of the equip-
ment, fluid, hoses, and stress caused during opera-
tion.
3. Using the equipment as a template, mark the
mounting holes on the wall at a convenient height
for the operator and so equipment is easily accessi-
ble for maintenance.
4. Drill mounting holes in the wall. Install anchors as
needed.
5. Bolt equipment securely.
Do not install equipment approved only for non-hazard-
ous location in a hazardous area.