Replace AWI Board
36 313386D
Replace AWI Board
1. Shut off ProMix 2KS/3KS power (0 position).
2. Shut off power at main circuit breaker.
3. Open the AWI module.
4. Disconnect the cable (15) and wires (17, 18) from
the board (22). F
IG. 55.
5. Remove the screws (21) and board (22).
6. Install the new board. Reconnect the cable (15) and
wires (17, 18).
• To avoid electric shock, turn off EasyKey power
before servicing.
• Shut off power at main circuit breaker.
• All electrical wiring must be done by a qualified
electrician and comply with all local codes and reg-
ulations.
• Read Warnings, page 3.
NOTICE
To avoid damaging circuit board when servicing, wear
Part No. 112190 grounding strap on wrist and ground
appropriately.
F
IG. 55. Replace AWI Board
TI12928a
4
10 15
1718
22