Filter
Top Products
Computer Configuration
20 313386D
LAN Network (Manual) Configuration
See FIG. 26. A LAN network (manual) configuration
enables you to work through a local network. Up to 100
EasyKeys may be connected in the network. The
EasyKeys and AWI Module must be on the same sub-
network. The EasyKeys can be connected to any LAN
drop.
NOTE: To change to a LAN (manual) configuration, you
must first connect to the AWI via the ProMix 2KS/3KS
network. See pages 16-17 for instructions and F
IG. 25
for cable connections.
To select a LAN (manual) configuration, go to the Set-
tings tab and select Manual configuration. You will be
required to enter IP, gateway, and Netmask addresses.
Contact your IS system administrator for assistance.
See F
IG. 38.
NOTE: Use a new IP address to access the AWI; this
replaces gracoawi (for LAN network systems only).
NOTE: Once Save is clicked, the AWI will disconnect the
user computer. Reconnect the AWI and computer as
shown in F
IG. 26. Reconfigure the user computer to
match the new LAN configuration. You can then login to
the AWI using the newly assigned IP address.
Click Save to apply the change.
F
IG. 38. LAN Network Setting