Filter
Top Products
Chapter 4: Web-Based Management
60 GE-DS-242-PoE Managed Ethernet Switch User Manual
Figure 4-26: Static VLAN interface
This page includes the following fields:
OBJECT DESCRIPTION
VLAN Name
Use this optional field to specify a name for the VLAN. It can be up to 16
alphanumeric characters long, including blanks.
Group ID
You can configure the ID number of the VLAN by this item. This field is
used to add VLANs one at a time. The VLAN group ID and available
range is 2-4094.
Port Indicate port 1 to port 26.
Add Defines the interface as a Port-Based member of a VLAN.
Member
Remove Forbidden ports are not included in the VLAN.
NOTE: All unselected ports are treated as belonging to another single VLAN. If the
port-based VLAN is enabled, the VLAN-tagging is ignored.
802.1Q VLAN
Tagged-based VLAN is an IEEE 802.1Q specification standard. Therefore, it is possible
to create a VLAN across devices from different switch venders. IEEE 802.1Q VLAN
uses a technique to insert a "tag" into the Ethernet frames. Tag contains a VLAN
Identifier (VID) that indicates the VLAN numbers.
You can create and delete Tag-based VLAN. There are 256 VLAN groups to provide
configure. Enable 802.1Q VLAN, the all ports on the switch belong to default VLAN,
VID is 1. The default VLAN can't be deleted.