Filter
Top Products
Chapter 4: Web-Based Management
86 GE-DS-242-PoE Managed Ethernet Switch User Manual
State Activity
Having set up the LACP aggregator on the tab of Aggregator Setting, you can
configure the state activity for the members of the LACP trunk group. You can tick or
cancel the checkbox beside the state label. When you remove the tick mark of the
port and click the Apply button, the port state activity will change to Passive.
Figure 4-46: State Activity of Switch 1
This page includes the following fields:
OBJECT DESCRIPTION
Active The port automatically sends LACP protocol packets.
Passive
The port does not automatically send LACP protocol packets, and
responds only if it receives LACP protocol packets from the opposite
device.