Filter
Top Products
C:\data\Projector\AirShot\AirShot_FMData\2634400112_VPL-
CX8676_AirShot\2634400112_VPL-
CX8676_AirShot\2634400112\2634400112VPLCX8676WW\02C01.fm
masterpage: Left
10
Wireless Connection
VPL-CX86/CX76
2-634-400-11 (1)
Connecting, disconnecting and
switching from the projector
1 Press the AIR SHOT key on the
remote commander.
The computer list appears.
2 Press M or m key on the remote
commander to select the computer,
and then press the ENTER key.
7[Tool bar
select] button
When the button is clicked,
only the tool bar for the
projector control is displayed.
When the button is clicked,
the whole main window is
displayed.
8 [
Minimum]
button
The Air Shot Version 2 main
window is reduced minimum.
9 [Close]
button
The Air Shot Version 2 main
window is closed.
0Projector
button
The icon of the connectable
projector, projector name (or
Nickname, if specified) and IP
address are displayed on the
button. Click the button to
connect to or disconnect from
the projector. By right-clicking
on the button and selecting
[Show Projector Web], the Web
display of the projector appears
on the computer.
qaControlled
projector select
menu
Select the projector to be
operated by the projector
control buttons. When only one
projector is connected, this
menu is not displayed.
qs Connected
computer
display
The icon, computer name, and
IP address of the computer
being connected to the projector
are displayed. The computer
name is changed in the [Option
Setting] window.When no
computer is connected to the
projector, this display does not
appear.
Items Functions
qdProjector
control buttons
With the buttons, you can
operate the projector selected
on the controlled projector
select menu.When only one
projector is connected, the
projector will be operated.
[Picture Muting] button: Click
the button to clear the picture
temporally. Click it again to
display the picture.
[Freeze] button: Click the
button to stop the motion of the
picture. Click it again to restart
the picture.
[Input Select] button: Click the
button to select the input signal.
[Power On/Standby] button:
Click to turn on the power of
the projector or set it in standby
mode.
Items Functions
Yamada PC
Connect PC?
Connecting PC: Yamada PC
(xxx. xxx. xx. x)
Tanaka PC
( xx. x. xx. xx )
Suzuki PC
(xxx. xxx. xx. x)
Saito PC
( xx. x. xx. xx )
Sakuma PC
(xxx. xxx. xx. x)
Appears when the computer is connected.