Filter
Top Products
C:\data\Projector\AirShot\AirShot_FMData\2634400112_VPL-
CX8676_AirShot\2634400112_VPL-
CX8676_AirShot\2634400112\2634400112VPLCX8676WW\02C01.fm
masterpage: Left
14
Wireless Connection
VPL-CX86/CX76
2-634-400-11 (1)
x Changing the settings
When you select [Setup] from the action menu, the [Network Setting] window of the selected
mode is displayed, where [Internet Protocol(IP)], [Wireless Network], and [802.1x
Authentication] settings can be changed. Select the desired item and press the ENTER (or
right) key to activate its setting items. To input the desired value for the items, press the ENTER
(or right) key. You can return to the setting menu with the ENTER (or left) key. Click [OK] to
save the settings and return to the initial display of the Air Shot 2 setting menu. If you select
[Cancel], the settings will not be saved and the initial display of the Air Shot 2 appears.
*: Disabled in Simple Mode
Items Functions
Internet Protocol(IP)* Specify the [Internet Protocol(IP)] settings: [IP Address
Setting (Manual/Auto)], [IP Address], [Subnet Mask],
[Default Gateway], [Primary DNS], [Secondary DNS].
IP Address Setting IP Address Setting: select [Auto(DHCP)] or
[Manual].When the [Manual] is selected, set [IP Address],
[Subnet Mask] and [Default Gateway].
IP Address Set the IP address for the projector.
(1.0.0.0~223.255.255.255)
Subnet Mask Set the subnet mask for the projector.
(0.0.0.0~255.255.255.255)
Default Gateway Set the default gateway for the projector.
(1.0.0.0 ~223.255.255.255)
Primary DNS Set the primary DNS server. (1.0.0.0~223.255.255.255)
Secondary DNS Set the secondary DNS server. (1.0.0.0~223.255.255.255)
Wireless Network Set in the [Wireless Network] window: [Network Mode],
[Network Name(SSID)], [Network Authentication], [Data
Encryption], [Key], and [Channel].
Network Mode* Select [Ad-hoc(Peer-to-peer)] or [Wireless Access Point]
• Ad-hoc(Peer-to-peer): for wireless LAN connection
without the access point
• Wireless Access Point: for wireless LAN connection with
the access point
Network Name(SSID)* Enter the same network name as that of the connected
computer or access point. A maximum of 32 characters/
numbers can be entered.
Network Authentication* Select the network authentication system from among
[Open], [Shared], [WPA], and [WPA-PSK].
Data Encryption* Select the data encryption system from among [WEP] or
[TKIP]. If the data encryption is not used, select [Disable].