Filter
Top Products
C:\data\Projector\AirShot\AirShot_FMData\2634400112_VPL-
CX8676_AirShot\2634400112_VPL-
CX8676_AirShot\2634400112\2634400112VPLCX8676WW\02C01.fm
masterpage: Left
6
Preparation
VPL-CX86/CX76
2-634-400-11 (1)
Installing from the CD-ROM
1 Insert the supplied CD-ROM into the
CD-ROM drive of the computer.
The application installation window
appears.
Follow the step 3 and following steps in
“Installing from the USB” on page 4.
If the installation window does not appear
automatically, click [My Computer]-[CD-
ROM] - [Dp_Inst].
Insert the supplied wireless LAN card into
the slot of the projector.
Before inserting or removing the card,
disconnect the power cord of the projector.
Inserting the card
Insert the card facing the right side towards
the front panel of the projector until it clicks.
• Never use a wireless LAN card other than the
supplied one.
• When the projector is carried, remove the
card from the slot.
Removing the card
1 Press the eject button at the upper side
of the slot.
The eject button pops out.
2 Press the eject button again.
The card pops out.
3 Remove the card.
After the card is removed, press the eject
button. If the button remains popped out, it may
cause breakage of the button.
Note
Preparing the Projector
Note
Notes
Note