Filter
Top Products
C:\data\Projector\AirShot\AirShot_FMData\2634400112_VPL-
CX8676_AirShot\2634400112_VPL-
CX8676_AirShot\2634400112\2634400112VPLCX8676WW\02C01.fm
masterpage: Right
27
Others
VPL-CX86/CX76
2-634-400-11 (1)
PC: Message displayed on the computer
PJ: Message displayed on the projector
When the computer is
connected to the projector, the
mouse moves more slowly.
• The computer is logged on with other than administrator
privileges (Windows XP/2000 only).
c The mouse moves slowly when the computer is logged on
with other than administrator privileges.
• In the [Option Setting]-[Connection Setting] -[Advanced],
[Capture image with video acceralator "off"] is not checked.
c Check [Capture image with video acceralator "off"].
c Even when the computer, OS and wireless LAN device of
the recommended system are used, the mouse may move
slowly.
Messages on the Display
Symptom Cause and Remedy
Message PC PJ Cause and Remedy
Now searching LAN
Module.
a
• The connectable LAN module within the PC is being
searched according to the priorities of the LAN modules
specified in the [Option Setting] window.
c If the message persists, check and set the LAN module
to be used for the Air Shot Version 2 in the [Option
Setting] window.
Waiting until the IP
address is set.
a
• The Air Shot Version 2 is waiting for the IP address to
be set for the LAN module.
c If this message persists, check the wireless and network
settings for the LAN module you use. If the
Auto(DHCP) is selected, it may take few minutes to set
the IP address.
No connectable Projector
has been found.
a
• Wireless transmission conditions are extremely bad.
c Place the projector close to the computer, or remove the
obstacles between the projector and computer.
• The projector with a different serial number from those
of the projector you want to connect is selected. (In the
Simple Mode)
c Check the serial number of the projector you want to
connect, and change the projector to be connected in
the [Simple Mode Setting] of the [Option Setting]
dialog box.
• The Wireless Network Setting of the projector is not
identical with those of the computer. (In the Manual
Mode).
c Check and re-set the Wireless Network Setting for both
the projector and computer.