Filter
Top Products
12 - 4 IMAGETEAM™ 2020/5620 System Manual
1. Scan the sample bar codes in the back of this manual. If the scanner reads
the sample bar codes, check that your bar code is readable.
Verify that your bar code symbology is enabled (see Chapter 6).
2. If the scanner still can’t read the sample bar codes, scan All Symbologies on
page 6-1.
If you aren’t sure what programming options have been set in the base, or if you
want the factory default settings restored, scan Resetting the Standard Product
Default Settings: Current Application Work Group on page 10-5.
Troubleshooting the Cordless System
The scanner must be linked to the base for the system to work properly. See
"Linking Scanner to Base" on page 1-6.