HandHeld Entertainment 4800I Barcode Reader User Manual


 
1 - 8 4600rp, 4600g/4600r, 4800i User’s Guide
9. To set up the serial wedge terminal ID, use the serial terminal ID 050 and
follow the instructions on page 2-1.
10. Program the port for data transmission using the barcodes on page 1-12.
Programming the Interface - Plug and Play
Plug and Play barcodes provide instant imager set up for commonly used
interfaces.
Note: After you scan one of the codes, power cycle the host terminal to have the
interface in effect.
Note: See "Imager Models" on page 1-2 to determine which interfaces apply to
your imager.
Keyboard Wedge Connection
If you want your system programmed for an IBM PC AT and compatibles
keyboard wedge interface with a USA keyboard, scan the barcode below.
Keyboard wedge is the default interface.
Laptop Direct Connect
For most laptops, scanning the
Laptop Direct Connect
barcode allows
operation of the imager in parallel with the integral keyboard. The following
Laptop Direct Connect barcode also programs a carriage return (CR) suffix, and
turns on Emulate External Keyboard (page 2-7).
IBM PC AT and Compatibles
with CR suffix
Laptop Direct Connect
with CR suffix