Filter
Top Products
Quick Check® 890 User’s Guide B - 1
B
Menu Setting Barcodes
The QC890 barcode verifiers are programmed in the factory for the most
common settings. If you need to change these settings, programming is
accomplished by scanning the barcodes included in this chapter.
An asterisk (*) next to an option indicates the default setting.
Resetting the Standard Product Defaults
If you aren’t sure what programming options are in your device, or you’ve
changed some options and want the factory settings restored, scan the
Standard Product Default Settings
barcode below.
Illumination Timer
Scan the appropriate barcode to set the duration (in seconds) of the illumination.
Default = 5 seconds.
Standard Product Default Settings
3 seconds
*5 seconds
15 seconds