HANNspree SN10T1 Graphics Tablet User Manual


 
Settings
29
To receive a file from a remote device
1. Make sure “Discoverable” is always activated after automatic timing turns off.
2. Select one file on the remote device and send it to the local device via Bluetooth; a
prompt for receiving an incoming file will popup on the upper right corner (orange dot);
then click on the pop up and on the file to confirm you want to receive the file.
Sound
Silent mode: tap to make all sounds except media & alarms are silenced.
Audible selection: tap to play sound when the screen selection sound.
You also can set the media and notification volume.
Display
Auto-rotate screen: tap it to turn on the function to switch the orientation automatically
while rotating the Tablet.
Auto Brightness: tap to auto-adjust the brightness on or off.
Brightness: drag the slider to adjust the brightness of the screen manually.
Screen timeout: to select the time amount to turn off the screen automatically.
Note: The screen will auto access the standby mode while there is no operation during the
chosen time interval.
Family accounts
Add family member: tap to add a new family member by creating a new contact.
Select from contacts: add a new family member by selecting from the existing contact list.
Family: tap to change ID color, edit nickname, contact details or remove it from family if
you add someone in the list.
Location, date& time
These settings apply to the select time zone, the date and the time shown in the status bar
at the top of the screen.