Filter
Top Products
BIOS Setup Utility
SN22A1 40
APM Configuration Selects to make advanced power management settings.
• USB Device Wakeup From S3: Enabling this will
allow you to use a USB device to wake up the
system.
• Restore on AC Power Loss: Sets the system state
when an unexpected power outage or shutdown
occurs.
• Power Off: The system remains off after power
is restored.
• Power On: The system reboots after the power
is restored.
• Last State: The system returns to the state at
the time the power outage or shutdown
occurred.
• Resume On LAN: Enabling this will wake up the
system when a wake-up signal is received from the
network.
• Resume On RTC Alarm: Enabling this will allow
you to specify the Date, Hour, Minute, and Second
for the system to boot up.
Hardware Health
Configuration
Selects to make hardware health monitoring settings.
• Shutdown Temperature: Enabling this will allow
you to set up the system shutdown temperature from
a range of 95 °C to 105 °C.
• H/W Health Function: Enabling this will display the
hardware condition of your system. Selecting
Disabled will hide these information.
USB Configuration Selects to display the information about your USB.