You can clean the front lens of the projector
using the following recommendations. You
cannot clean any of the internal surfaces.
• To minimize the risk of damaging or
scratching the lens surface, blow dust
particles off the lens with clean, dry,
deionized air.
• If this method does not work, use the
following method:
– Wipe the lens in a single direction with a
clean, dry cloth. Do not wipe back and forth
across the lens.
– If the cloth is dirty or smears the lens, wash the cloth. If the cloth is still dirty after washing it or the fabric is
damaged, replace it.
• Cleaning requires special consideration:
– Do not spray any type of fluid or cleaner directly on the lens surface.
– Cleaners might damage the lens.
– Do not use fabric softener when washing a cleaning cloth or softener sheets when drying the cloth. Chemicals
on the cloth might damage the surface of the lens.
• Do not store a cleaning cloth in contact with the lens for a long time because doing so
contaminates the lens with dye from the cloth. The cloth can be contaminated if left in the
open air.
CLEANING THE PROJECTOR LENS
13