Filter
Top Products
As the projector operates over time, the brightness of the projector lamp gradually decreases and
the lamp becomes more susceptible to breakage. You can install a new lamp at any time to bring
the projector up to factory-fresh brightness.
The lamp bulb has approximately a 1000-hour life. The lamp operates at a very high temperature,
so wait 30 minutes before removing the lamp bulb. Use a 35 Watt 12V MR-11 lamp bulb, found
where standard light bulbs are sold in home improvement and hardware stores.
TO REPLACE LAMP BULB
3. Use a Phillips/cross head
screwdriver (not included) to
unscrew the cover and remove.
4. Use a Phillips/cross head
screwdriver (not included) to
unscrew the inside panel. Panel
stays attached.
1. Turn off
ZOOMBOX
and allow it
to cool for 30
minutes.
2. Unplug the
power cord.
5. Remove existing bulb. Use a soft
cloth to prevent breakage.
6. Plug in replacement bulb.
7. Reattach panel.
8. Reattach cover.
14