Filter
Top Products
DIVA T/A ISDN Modem User’s Guide 69
Parameter
Description and Values
Initial Billing
Interval
Billing Interval
(Continued)
Billing Interval: Specifies the increments
your Service Provider uses to bill subsequent
usage of your ISDN line (usage after the
initial Billing Interval expires). For example
if your Provider charges $Y per minute for
each minute following the Initial Billing
Interval, enter 60.
Note: Setting the timer to 0 disables it. The
Initial Billing Interval remains in effect.
Default: 60 seconds.
Update Date
Update Time
Note: Models equipped with analog device
ports.
The DIVA T/A supports Caller ID (North
America only). If you have a phone with call
display and are receiving calls with the
incorrect time or date, use Update Time to
reset the date and calendar.
If you power off the DIVA T/A, click Update
Time when you turn it back on. This ensures
that the correct date and time are set on the
DIVA T/A.
11
After completing the advanced parameters configuration, press
Escape to exit the Advanced menu.
12
From the Main menu, select Save Profile and press Enter to save
the changes made to the profile.
13
Select Restart. Verify that the correct startup profile is specified,
and then press Enter.
After the DIVA T/A has restarted, check that the D LED and Link
LED on the DIVA T/A’s front panel. If the LEDs are steady, the
DIVA T/A is working correctly; if they are not steady, check your
configuration and try again. For more details on the LEDs, refer to
“LED Status Indicators on the DIVA T/A” on page 106.
Your DIVA T/A is configured for ISDN. Close your VT-100
application. Continue at the section “Using the DIVA T/A on page
73.”