Filter
Top Products
DIVA T/A ISDN Modem User’s Guide 71
3
Click Yes when prompted if you want to continue.
4
Select the device with the required firmware and click OK (if
necessary click Have Firmware, and specify the path to the
firmware; click Open).
5
Click Yes when prompted if you want to continue. The new
firmware will download to the device. This will take a few
minutes.
6
Click OK when the download is complete. The device will
automatically be refreshed.
Updating Firmware under DOS, and OS/2
Warning: When you update your DIVA T/A firmware, the current
profile configurations might get erased. It is recommended, therefore,
that you record your current settings and SPID numbers before
updating (use the AT command AT&V or AT@MENU with any
terminal emulation program to view the current settings).
To update your DIVA T/A:
1
Start a terminal-emulation software application capable of X-
Modem or 1K-Xmodem (faster) transfer.
2
Configure the terminal to talk to the DIVA T/A ISDN Modem.
3
Type AT$Z.
4
Type at@load (this command is case sensitive).
5
Start the X-Modem transfer and select either the updated
TABOXNA.ELM or TABOXROW.ELM from wherever it is
located, for example: your \TEMP directory.
6
Wait for the reply that denotes successful transfer. The DIVA
T/A will restart automatically.
Warning: Powering off the DIVA T/A immediately following
the transfer could damage your DIVA T/A. Wait a few moments
before powering off your DIVA T/A.
7
If required, reconfigure your DIVA T/A (use the settings you
recorded, prior to performing the download).