Filter
Top Products
RCV56HCF PCI/CardBus Modem Designer’s Guide
1129
ROCKWELL PROPRIETARY INFORMATION
6-5
Table 5-2. Command Set Summary - Alphanumeric Sort (Cont’d)
Configuration
Command Description Data/Fax Data/Fax/Voice Data/Fax/Voice/
Speakerphone
Data/Fax/Voice/
Speakerphone/
ISDN
+IFC DTE-Modem Local Flow Control X X X X
+ILRR DTE-Modem Local Rate Reporting X X X X
+ITF Transmit Flow Control Thresholds X X X X
+MR Modulation Reporting Control X X X X
+MS Modulation Selection X X X X
+VBT Buffer Threshold Setting - X X X
+VCID Caller ID (CID) - X X X
+VDID DID Feature - X X X
+VDR Distinctive Ring - X X X
+VDT Control Tone Cadence Reporting - X X X
+VDX Speakerphone Duplex Mode - - X X
+VGM Microphone Gain - - X X
+VGR Voice Gain Receive (Record Gain) - X X X
+VGS Speaker Gain - - X X
+VGT Voice Gain Transmit (Playback Volume) - X X X
+VIP Voice Initialize All Parameters - X X X
+VIT Voice Inactivity Timer (DTE/modem) - X X X
+VLS Analog Source/Destination Selection - X X X
+VNH Automatic Hang-up control - X X X
+VPR Select DTE/Modem Interface Rate - X X X
+VRA Ringback Goes Away Timer - X X X
+VRN Ringback Never Appeared Timer - X X X
+VRX Start Modem Receive (Record) - X X X
+VSD Silence Detection (QUIET & SILENCE) - X X X
+VSM Compression Method Selection - X X X
+VSP Speakerphone ON/OFF - - X X
+VTD Beep Tone Duration Timer - X X X
+VTS Voice Tone Send - X X X
+VTX Start Modem Transmit (Playback) - X X X
-SSE Enable/Disable DSVD X X X X
A Answer X X X X
D Dial X X X X
E Command Echo X X X X
H Hook Control X X X X
I Request Identification Information X X X X
L Monitor Speaker Loudness X X X X
M Monitor Speaker Mode X X X X
O Return to Online Data State X X X X
P Select Pulse Dial X X X X
Q Result Code Suppression X X X X